H形钢/钢板规格抛丸清除垃圾机◆物料框架 Product structure超声波焊接机主要是由处理室、别墅地下室卸料辊道与买进卖出卸料辊道、抛丸器、弹丸再循环装置 ( 含完善机、分离法器、纵横交错双螺旋卸料器和供丸供水管道 ) 、吹扫佳博体育软件下载、降尘、电力工程把控等特点部分构成的。This machine is mainly composed of clean room, indoor rollor conveyeer and in and out of rollor conveyeer, shot device, projectile circulation system (including hoist, separator, vertical and horizontal conveyor for spiral pipe) , purging institutions, dust removal, electrical control function components.◆厂品机制 Product principle为连续不断式放卷的高作用连续不断式上班清洁机,在清洁流程中由电器设备保持的可变性频调速器的推送辊道将钢设计件或合金钢、不锈钢板材送进清洁机室身上抛射区时,其全身上下各面感受到原于八台各个平面坐标地方的抛丸器的強力密集点弹丸的打击网络谣言与振动,使其上的阳极氧化锈层及污渍十分迅速离开,合金钢的表明就得到 含有相应滑度的晶亮的表明。陷入合金钢表面的弹丸与锈尘经搜集锥型推送过来弹丸不断配置平台,在清洁窒内两人辊道货物搬运部件。清洁流程中,撒落下去来的丸尘交织物经室体漏斗、纵横交错向锥型推送机汇成于发展机中下部,再发展到机顶部的分割器里,分割后的纯真弹丸陷入分割器料仓中,供抛丸不断配置食用。抛丸清洁中制造尘土,由抽疯管送向排尘平台,油烟静化器处置后的净气排卸到空气中;顆粒状尘土,由抽疯管送向排尘平台,油烟静化器处置后的净气排卸到空气中,顆粒状尘土逮捕捉搜集。Continuous high function of feeding a continuous work cleaning machine, in the process of cleaning up from the electrical control can be variable frequency speed rollor conveyeer steel structure or steel, and will send into steel cleaning up machine room area, its trajectory in the whole face from each by eight different coordinates the location of the powerful dense is shot of the projectile attack and friction, make its oxidation rusty layer and dirt quickly fall off, steel surface roughness has certain the bright and clean for surface. Fall into steel above with rust dust the projectile recycling helical conveyer to projectile circulation system, the clear channel outdoor both sides in unloading workpieces. In the process of cleaning up, breaking down the Chambers blasting dust mixture, and vertical and horizontal funnel to screw conveyor are collected to hoist the lower, and then promoted to the upper part of the machine, after the separation in the separator pure projectile into separator, is shot in the hopper for recycling. Is shot from the dust, cleaning up by convulsions tube send to dust removal system, the purification processing of the net after gas emissions into the atmosphere; Granular dust by convulsions tube, send to dust removal system, the purification process after the net gas emissions into the atmosphere, the granular dust was caught and collected.H钢材/钢板材料抛丸清洁机◆ 物料共同点 Product features刚板抛丸机厂家都是种消除 H 钢、形钢、网架、刚板的多性能钢板材抛丸预解决机。抛丸器分布行式为多弯度,建议选用了最先进的高效果抛丸器,抛挤出快速密布的弹丸束,严打在初始情况产品的个个连接对其进行立体空间的、全位置的消除,使产品各面上的生锈层、焊渣、钝化皮下列关于它废弃物不断剥落,获得了极具一定的不光滑度的光滑面,不断升高了油漆黏附力与钢板材面的黏附力,并不断升高产品的抗疲劳值和抗的腐蚀技能,缓和了产品在于效果,增长其适用寿命短。Steel shot machine is a clear H steel, steel, rack, steel, the multi-function steel is shot pretreatment equipment. Peen-forming decorate a form for the multiple perspectives, choose the advanced efficient peen-forming is a dense, aerosol propellant high speed of the projectile, blow the original state in parts of stereo, full range of cleaning, to make the work on the surface of the corrosion layer, welding slag and oxide skin and other contaminants quickly fall off, get has certain roughness of surface is bright and clean, improve the paint film with steel surface adhesion, and improve the resistance of fatigue and corrosion resistance, and improve the quality of the inner and prolong the service life.◆ 主要的技巧性能 Main technical parameters
| 系统型号查询 Model | 工作单位 Unit | Q698 | Q6915 | Q6920 |
| 管用整理参数 Width | mm | 1200 | 1500 | 2000 |
| 室体物料口厚度 Dimension | mm | 1200×400 | 1200×400 | 2000×400 |
| 除去钢件长 Length | mm | 1200-6000 | 1200-12000 | 1200-12000 |
| 辊道输送带流速 Speed(无及可控硅调压) | m/min | 0.5-4 | 0.5-5 | 0.5-4 |
| 清理垃圾钢材尺寸 Thickness | mm | 3-60 | 1.5-60 | 3-60 |
| 解决材料规格尺寸 Specifications |
| ≤20#<≤16# | ≤20#<≤16# | ≤20#<≤16# |
| 抛丸量 Shot peening quantity | kg/min | 4×250 | 4×250 | 6×250 |
| 第二次放进量 First input volume | kg | 3000 | 4000 | 4500 |
| 滚刷(刮粪)修改：宽度 Width | mm | 200 | 350 | 450 |
| 室内通风量 Air volume | m3/h | 17560 | 19000 | 19550 |
| 外型尺寸规格 Shape dimension | mm | 12180×4250×7095 | 15200×5370×6797 | 30650×6850×7500 |
| 地面磁砖左右宽度 Depth under the ground | mm | 1616 | 2257 | 2800 |
| 总工作功率(不添加清灰)Total power | kw | 78.3 | 113.5 | 156.6 |
| 机械总重 Total weight | t | 20.4 | 33 | 41 |
| 机款式 Model | 政府部门 Unit | Q6925 | Q6930 | Q6940 |
| 更好清理工作：宽度 Width | mm | 2500 | 3000 | 4000 |
| 室体出料口尺寸图 Dimension | mm | 2500×800 | 3000×800 | 4000×400 |
| 整理工件产品总长度 Length | mm | 3000-12000 | 2400-12000 | 4500-18000 |
| 辊道运送车速 Speed(无及调节) | m/min | 0.5-4.5 | 0.5-4 | 5月8日 |
| 消除钢材尺寸 Thickness | mm | 3-60 | 3-110 | 4.5-100 |
| 正确处理型材外形尺寸外形尺寸 Specifications |
| 60×8-300×1000 | 60×8-300×1000 | 60×8-300×1000 |
| 抛丸量 Shot peening quantity | kg/min | 6×250 | 6×360 | 8×360 |
| 第三次放到量 First input volume | kg | 4500 | 8000 | 11000 |
| 滚刷(刮粪)修整横向 Width | mm | 600 | 850 | 900 |
| 透风量 Air volume | m3/h | 27758 | 28050 | 38000 |
| 外观设计寸尺 Shape dimension | mm | 31200×8070×7758 | 44042×6385×11117 | 45000×7830×11400 |
| 大理石地面下列长度 Depth under the ground | mm | 2353 | 2800 | 4317 |
| 总功效(不含有净化)Total power | kw | 224.55 | 204.5 | 293.6 |
| 机设备总重 Total weight | t | 53.2 | 71.8 | 75 |
佳博体育软件下载:
